首頁 > How to...? (video,manual) > Motorola > How to enable diag on Moto 2 2gn Verizon (XT1528)

How to enable diag on Moto 2 2gn Verizon (XT1528)

1. Install Motorola usb driver
2. Then you need edit c:/Program Files/Common Files/Motorola Shared/Mobile Drivers/Drivers/motport.inf

you need add this lines. File have two parts : for 32bit OS and for 64 bit OS.
 

; MotoE XT1528
%USBMOTQCDIAGPORT%    = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_00
%USBMOTQCDIAGPORT%    = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_01
%USBMOTQCDIAGPORT%    = USBMOTPORT, USB\VID_22B8&PID_2EC1&MI_02
; MotoE XT1528

3. Restart windows
4. Reboot the phone in Bootloader mode - (Vol. down + power)
5. Select "BP Tools" (Use Vol +/- & power button for selection)
6. Connect the Phone to windows using USB cable.
7. In device manager you can see the Motorola QC Diag port 
8. This port can be used to connect to DFS tool.

Some times this method not work because connected device have another VID or PID data. What you need to to in this case :
 

1 Open device manager, If you do not know how to do it read this

2 You will see moto e unknown devices

3 Right click on unknown device then Properties, go Detailes. In Detailes menu you will see Properties (or something like that ) , scroll to ID hardware). Here you will see VID and PID .

4 You need check all unknown Moto e devices and get this data. Then then just put your parameters in the code and save it to c:/Program Files/Common Files/Motorola Shared/Mobile Drivers/Drivers/motport.inf .

 Example

5 Restart Windows and check